Take off the burden of traveling light (T=Transfer) open free time controller

EPSON recently launched a more compact, cost-effective T3 compact SCARA robot. The robot broke the EPSON traditional SCARA robot concept, from the external structure of the design concept of a complete update, from this T3 opened a new era of free controller. Because of the built-in design of the controller, there is no need to deal with complex cabling problems during setup and maintenance, greatly improving the cost efficiency and maintaining a low total operating cost.

With affordable and cost-effective features, the T3 robot has become ideal for implementing simple manual work automation or instead of multi unit, single axis modules requiring complex erection configurations.

Characteristics and advantages

T3 compact SCARA integrated machine, compared to the traditional EPSON SCARA robot, which has the following three obvious advantages:

Compact structure, easy to install!

Built in SCARA controller

The built-in controller reduces the requirement for installation space and greatly simplifies the initial installation and reconfiguration process.

Easy routing!

Simple I/O and shorter cable duct

The I/O port is close to the arm end for easy routing. In addition, the short wire tube design simplifies the external wiring.

No batteries, easy maintenance!

Battery free motor unit

The motor unit retains the origin position data in memory without a battery, thereby eliminating the trouble of replacing the battery.

With these advantages, T3 can not only help customers realize the automation of transport easily, but also help customers reduce the total cost greatly. In short, the more you use, the more you will save.

Instead of manual work, easy and efficient implementation of simple handling automation!

The EPSON T3 robot is able to automate simple manual tasks at a lower cost without the need to extend or replace existing workspaces and is very simple to maintain. With strong work efficiency, T3 robots are cutting costs every day - the longer you use them, the more you'll save.

Lower overall cost than single axis modules!

Although the upfront cost of installing single axis modules may be low, the subsequent setup and maintenance of multiple single axis modules and associated wiring complexity and long-term costs will increase rapidly. In addition, the single axle module requires more installation space, resulting in the need for a larger work unit, reducing the overall usable area of the plant. On the other hand, T3 robots are easy to install and flexible, and suitable for all kinds of tasks. At the same time, T3 covers a small area, and can increase productivity and reduce overall cost.